Upgrade Band Saw Urethane Tires – 14″ x 1″ x .095″ (2 Pack) Compatible with Jet, Grizzly, and Powermatic Band Saws

Perfect for my axminster at2552b, I had a bad vibration and oscillating blade back and fore on all blades, these tyres completely eliminated the vibration and blade movement.

Buen producto

Quedaron al tamaño, sólo hubo que recortar un poco en lo ancho..

Fitted perfectly and we’re exactly as described

As described

Worked perfectly! It worked perfectly! Improved blade stability. I imagine being urethane it will last much longer than rubber.

Installation not nearly as difficult as I imagined. These fit my Jet 14 inch bandsaw perfectly. They were a bit of a challenge to install but not nearly as bad as I expected based on some other reviews. I used a couple spring clamps to hold the tire in the groove on the wheel and two large screwdrivers to stretch and slide the tire onto the wheel as I worked one of the clamps the rest of the way around. Before pulling the screwdriver out after completing the circle I replaced it with a round shaft Phillips screwdriver driver and pulled that around the wheel under the tire a couple times to even out the tension. The first wheel took about 15 minutes with the learning curve but the second one only took 5 minutes. Saw runs much more smoothly with no vibration. Any sawdust on the wheel after running can be easily brushed off so it doesn't continue to pack and build up.

Works for Jet band saw. These fit my 14” jet bandsaw perfectly. Placed them under my feet and stretched them a few times before installing. Taking off the wheels first helped a ton. Was able to get them on with no tools.

Good quality Working as expected so far. They are a bit challenging to put on, but that is to be expected if they are going to be tight and not slip.

Tight fit on Central Machinery saw. Fits Central Machinery 14-inch 4-speed bandsaw. VERY TIGHT and tough to get on. I ended up heating them in hot water, stretching them against my knee, and using a wood clamp to hold one side in the wheel. But they do fit and seem to work fine. Cannot tell if they introduced more vibration to the saw, which could happen when stretching it on due to thicker material remaining in one place during stretching. My saw has always had something out of balance which needs correcting.

It Worked! Timely received at reasonable price. Had no problems installing. would buy again

Good price, good quality It was a little difficult to install, but good tight fit, the tire does not slip and band saw blade does not slip.

A little bit of work to get on, but the right method makes all the difference. Runs like new again. I don't do much woodworking anymore because of a disability, and I miss it, but when my bandsaw went down due to the tires on the pulleys getting deteriorated to a point to where they broke, I really missed my bandsaw. I had forgotten how often I used this for so many tasks that the band saw makes so easy. I picked up this replacement set of polyurethane tires, not wanting to go back to rubber, although the rubber ones have lasted a dozen years or more, I just wanted to buy one last set and not have to worry about how long they were going to last me. I've included a little video explaining what method worked best for me, but I didn't necessarily go through a video showing the process, but trust me, if you follow what I mentioned in the video you'll get these on without much trouble. They work as they should and make my band saw operate like it was brand new again. I'm very happy that I chose these ones and that they went on with such relative ease.